ADAM Audio subwoofers are designed with one primary goal in mind: Achieving absolute accuracy and an authentic natural sound in the process of music reproduction. This means combining exceptional bass power with precision and clarity in every subwoofer. These elements are the perfect partners to complement the highly acclaimed clarity and transparency of ADAM monitors in the lower and lowest frequencies.
All subwoofers feature both balanced (XLR) and unbalanced (RCA) input/output connectors and comprehensive control options that allow for adapting to different room acoustics and requirements.
Panel / Controls
All subwoofers feature a level control (-60dB to +6dB), phase switch (180°) and a variable upper frequency control (50-150Hz). For the satellite outputs, an 85Hz high pass filter can be switched in to block frequencies below 85Hz so satellite speakers can meet the Dolby® recommendations for theater sound and also to relieve the satellites from the lower frequencies. In addition, you can either switch on/off the subwoofer manually or use the option of automatically powering up the subwoofer whenever it receives a signal (‚signal-on/ continuous').
Sub10 Mk2
The Sub10 Mk2 is a powerful subwoofer designed to extend the low frequency capabilities of any near or midfield monitoring system down to 25Hz .
A sturdy special woofer with extended cone travel and a heavy-duty coil have been optimized for accurate reproduction from a bass reflex enclosure. The down-firing bass reflex tube avoids intrusive ventilation noise because of its generous size and shape. The PWM amplifier produces over 90% efficiency and can handle critical passages without overheating for long periods of time. An additional output allows you to cascade as many subwoofers as needed.
The Sub10 Mk2 subwoofer provides a precise combination of low cutoff frequency (-3 dB at 25Hz) and an undistorted high sound pressure level (113dB at 1m).
ADAM Audio subwoofers are designed with one primary goal in mind: Achieving absolute accuracy and an authentic natural sound in the process of music reproduction. This means combining exceptional bass power with precision and clarity in every subwoofer. These elements are the perfect partners to complement the highly acclaimed clarity and transparency of ADAM monitors in the lower and lowest frequencies.
All subwoofers feature both balanced (XLR) and unbalanced (RCA) input/output connectors and comprehensive control options that allow for adapting to different room acoustics and requirements.
Panel / Controls
All subwoofers feature a level control (-60dB to +6dB), phase switch (180°) and a variable upper frequency control (50-150Hz). For the satellite outputs, an 85Hz high pass filter can be switched in to block frequencies below 85Hz so satellite speakers can meet the Dolby® recommendations for theater sound and also to relieve the satellites from the lower frequencies. In addition, you can either switch on/off the subwoofer manually or use the option of automatically powering up the subwoofer whenever it receives a signal (‚signal-on/ continuous').
Sub12
The Sub12 is a powerful subwoofer designed to extend the low frequency capabilities of any near or midfield monitoring system down to 22Hz.
A sturdy special woofer with extended cone travel and a heavy-duty coil have been optimized for accurate reproduction from a bass reflex enclosure. The down-firing bass reflex tube avoids intrusive ventilation noise because of its generous size and shape. The PWM amplifier produces over 90% efficiency and can handle critical passages without overheating for long periods of time. An additional output allows you to cascade as many subwoofers as needed.
The Sub12 subwoofer provides a precise combination of low cutoff frequency (-3dB at 22Hz) and an undistorted high sound pressure level (115dB SPL at 1m).
ADAM Audio subwoofers are designed with one primary goal in mind: Achieving absolute accuracy and an authentic natural sound in the process of music reproduction. This means combining exceptional bass power with precision and clarity in every subwoofer. These elements are the perfect partners to complement the highly acclaimed clarity and transparency of ADAM monitors in the lower and lowest frequencies.
All subwoofers feature both balanced (XLR) and unbalanced (RCA) input/output connectors and comprehensive control options that allow for adapting to different room acoustics and requirements.
Panel / Controls
All subwoofers feature a level control (-60dB to +6dB), phase switch (180°) and a variable upper frequency control (50-150Hz). For the satellite outputs, an 85Hz high pass filter can be switched in to block frequencies below 85Hz so satellite speakers can meet the Dolby® recommendations for theater sound and also to relieve the satellites from the lower frequencies. In addition, you can either switch on/off the subwoofer manually or use the option of automatically powering up the subwoofer whenever it receives a signal (‚signal-on/ continuous').
Sub15
The Sub15 is an extremely powerful subwoofer capable of extending the frequency range of main and midfield monitors down to 20Hz. The sturdy 15" woofer is made of an exceptionally rigid aluminum membrane and is driven by two powerful magnets and a 100mm voice coil. With 1000 Watts (RMS) power capability, the PWM amplifier has an efficiency factor of nearly 90%. With these performance features, the Sub15 is easily capable of handling critical musical passages with intense and sudden bass peaks without showing signs of distortion or overheating. The downward firing bass port has been specially designed with ample dimensions and rounded edges to cancel any port noise.
In order to adjust the sound of the Sub15 to different room situations or individual taste, we have implemented several controls including one for volume (-60dB to +6dB) and one for the crossover frequency (50Hz - 150Hz). The satellite speakers can either be driven full range or high pass filtered at 85Hz. This allows the Sub15 to be easily integrated into a Dolby surround setup. Unfavorable phase relationships between the satellites and the subwoofer, particularly in the crossover frequency range, can be easily controlled with the supplied phase reverse switch.
The Sub15 is also very flexible when it comes to connectivity: There are balanced (XLR) and unbalanced (RCA) input/output connectors to be found on the rear of the subwoofer.
The Sub15 combines excellent transient response capability with an impressive low frequency performance to enable a genuinely musical reproduction experience. With a high and undistorted sound pressure output of 120dB maximum SPL at one meter, the Sub15 makes the perfect subwoofer for mid-sized and larger control rooms.
ADAM Audio subwoofers are designed with one primary goal in mind: Achieving absolute accuracy and an authentic natural sound in the process of music reproduction. This means combining exceptional bass power with precision and clarity in every subwoofer. These elements are the perfect partners to complement the highly acclaimed clarity and transparency of ADAM monitors in the lower and lowest frequencies.
All subwoofers feature both balanced (XLR) and unbalanced (RCA) input/output connectors and comprehensive control options that allow for adapting to different room acoustics and requirements.
Panel / Controls
All subwoofers feature a level control (-60dB to +6dB), phase switch (180°) and a variable upper frequency control (50-150Hz). For the satellite outputs, an 85Hz high pass filter can be switched in to block frequencies below 85Hz so satellite speakers can meet the Dolby® recommendations for theater sound and also to relieve the satellites from the lower frequencies. In addition, you can either switch on/off the subwoofer manually or use the option of automatically powering up the subwoofer whenever it receives a signal (‚signal-on/ continuous').
Sub2100
ADAM has developed the unique Sub2100 subwoofer for the special requirements of large control rooms and studios. The Sub2100 combines a huge 21.5" woofer and an amplifier capable of 1000W continuous power housed in a bass reflex enclosure tuned for reproducing frequencies down to 18Hz. The sheer power and extremely high efficiency (99dB/ W/m) enable this system to produce linear SPL peaks of ≥128dB without any significant compression.
The world‘s largest voice coil
Essential to the volume of this woofer is the gigantic 6” voice coil, which is the largest worldwide. Equipped with this voice coil, the Sub2100 is capable of reaching the highest SPLs in the lowest frequencies that can be perceived by the human ear. On every level, the Sub2100 establishes a new benchmark in subwoofer technology.
ADAM Audio subwoofers are designed with one primary goal in mind: Achieving absolute accuracy and an authentic natural sound in the process of music reproduction. This means combining exceptional bass power with precision and clarity in every subwoofer. These elements are the perfect partners to complement the highly acclaimed clarity and transparency of ADAM monitors in the lower and lowest frequencies.
All subwoofers feature both balanced (XLR) and unbalanced (RCA) input/output connectors and comprehensive control options that allow for adapting to different room acoustics and requirements.
Panel / Controls
All subwoofers feature a level control (-60dB to +6dB), phase switch (180°) and a variable upper frequency control (50-150Hz). For the satellite outputs, an 85Hz high pass filter can be switched in to block frequencies below 85Hz so satellite speakers can meet the Dolby® recommendations for theater sound and also to relieve the satellites from the lower frequencies. In addition, you can either switch on/off the subwoofer manually or use the option of automatically powering up the subwoofer whenever it receives a signal (‚signal-on/ continuous').
Sub8
The Sub8 is a small yet powerful subwoofer designed to extend the low frequency capabilities of any nearfield monitoring system down to 30Hz.
It houses a robust 8.5" woofer with a 1.5" voice coil driven by a 160W ICE power amplifier. This amp combines low heat generation with high performance to handle maximum power levels, even during long mix sessions.
The front baffle features two motorized knobs that let you tailor input level and crossover frequency settings. These settings can also be controlled via the included wireless remote, allowing you to optimize your sound reproduction from your ideal listening position.
The Sub8 is designed for smaller rooms up to 20 square meters. It is an ideal match for the ADAM AX-Series and the S1X and S2X nearfield monitors.
Features:
active 10" Subwoofer
130 Watt Class-D-Amplifier
Frequency Range: 32 Hz - 120 Hz
adjustable low pass filter
perfect match with loudspeaker of the T-Series (T5V & T7V)
Another step forward…
Amphion’s first Base Extension System was introduced back in 2015. The concept of keeping the stereo information all the way down has since spread and many brands have followed suit. The updated BaseTwo25 System combines the best attributes of our previous Base systems making it powerful modern creative audio tool. BaseTwo25 provides insightful detail and control and packs maximum energy into the lowest octave – giving no hidden surprises in the playback – and allows the sound engineer to hear and feel throughout the whole frequency spectrum.
BaseTwo25’s low-frequency extension system is equally at home with any sound making in any application, be it music, gaming, or movies. It excels in any two or multichannel context, where correct reproduction and appreciation of the lowest octave is critical. Amphion’s innovative approach to low-frequency monitoring provides producers, sound engineers, and artists with a completely new perspective on bass frequencies – for example how they contribute to rendering of spaces – especially helpful in modern multichannel and Atmos applications.
The BaseTwo25 is a state-of-the-art monitoring solution converting any Amphion two-way studio monitor into a full-range, time and phase coherent, three-way system. These full-range towers extend all the way down to 20Hz. Each BaseTwo25 has 2 x 10 inch woofers (top) and matching 2 x 10 inch radiators (below) mounted in back-to-back force-canceling mode on both sides of the cabinet. The system is driven by single 2U rack mountable BaseAmp1200, which houses a 2 x 700W amplifier, and Amphion’s discrete filtering module with a crossover selection and variable-level attenuator.
In addition to providing tight, tuneful bass, BaseTwo25 improves midrange clarity and increases the midrange power-handling abilities of the paired monitors. This is achieved by reduced intermodulation distortion as the low-end frequencies are transferred from the monitors to the base extenders. The new selectable crossover provides integration even when extenders are placed behind a large format console, while keeping the monitors on the meter bridge. BaseTwo25 works with all Amphion products, as well as with monitors that have sufficient speed and resolution in the critical upper-bass/lower-mid frequencies.
Amphion’s FlexBase25 is a modern approach to subwoofer design. FlexBase25 is room friendly and equally suited for studio acoustics as well as less-treated home studio environments. It is easy to setup and intuitive to adjust. FlexBase25 is a single box, stereo base extension system, which is placed on the center line between the main speakers.
Wide adjustment possibilities regarding crossover frequency (35-260 Hz), subwoofer level, as well as the mono-stereo spread, allow FlexBase25 to address the needs of a rapidly changing landscape of modern music-making. With a turn of a few dials, the system adapts to any task you happen to be working on. It can be fat, fun, and vibey when writing and producing. It will be precise, correct, and analytical when putting the finishing touches on a track or a film score.
FlexBase25 does not work like a conventional subwoofer. It does not only add, it also transforms. FlexBase25 turns your 2-way monitor into a 3-way full range system, which increases the monitor’s headroom radically. Pair it with One12 or One15 for an ultra-fast, easy to adjust small room full-range system. Place it behind your console and let it blend seamlessly with your One18, Two15 or Two18 monitor, which are located on a meter bridge. When you want to dial in on the midrange the by-pass function allows you to use your monitors for a narrower midrange view.
While FlexBase25 is naturally optimized for Amphion products, nothing prevents using it with different studio monitors as well.
Der SCM0.1/15 ist ein aktiver Subwoofer mit integrierter 1000W Class-A Endstufe und einem robusten 375 mm Tieftöner. Der maximale Dauerpegel für Frequenzen bis hinunter zu 20Hz beträgt 118dB @ 1m mit sehr geringen Verzerrungen. Der SCM0.1/15 kann beispielsweise zum Abhören des LFE Kanals in Surround-Anwendungen oder zur Erweiterung der tiefen Frequenzen in Systemen mit kleineren Hauptmonitoren wie den SCM20 ASLPro eingesetzt werden. Eine vielseitige Benutzerschnittstelle ermöglicht die Einstellung der Verstärkung, der Trennfrequenz, der Frequenzkontur und der Phasenlage. Zum Anschluss an die professionellen Systeme SCM200ASL oder SCM300ASL sind größere maßgefertigte Subwoofer auf Basis des SCM0.1-15 erhältlich.EigenschaftenSuperlinearer 375mm Tieftöner mit 75mm GewebekalotteClass-A Verstärker mit 1000WPhaseneinstellung, variable Trennfrequenzvariable VerstärkungStereo-Eingänge6 Jahre Garantie
Features
Active 12" subwoofer
High performance sealed box design using 12”/314mm ATC proprietary sub driver.
Ideal partner to the ATC SCM12, SCM20, SCM25A Pro, SCM45A Pro, SCM50A Pro.
Suitable for use in stereo, surround and immersive audio applications.
On-board 300W convention cooled discrete MOSFET class A/B amp.
2 x balanced XLR inputs
2 x balanced XLR outputs (un-filtered/processed).
User adjustable gain, low pass frequency, polarity and phase settings.
Remote sub muting via latching footswitch (supplied separately, latching type, ¼”/6.35mm jack connection)
In-Wall variant with remote amplifier also available – the SCS70iW Pro.
Aktiver 7" Subwoofer
Die TS (ThunderStorm) Subwoofer zeichnen sich durch kräftige, akkurate und verzerrungsarme Wiedergabe aus, wie sie für alle EVE Audio Studiomonitore charakteristisch ist. Alle TS-Serie Subwoofer sind mit symmetrischen XLR Ein- und Ausgängen (Stereo In, Stereo Out, LFE In, LFE/Sub Out) auf der Rückseite und zwei gerasterten Encoder-Potis mit LED-Ring auf der Vorderseite ausgestattet.Mit der serienmäßig zum Subwoofer gehörenden Fernbedienung lässt sich die Lautstärke des Subwoofers und des gesamten Stereo-Systems regeln – ganz bequem vom Hörplatz aus.
Aktiver 8" Subwoofer
Die TS (ThunderStorm) Subwoofer zeichnen sich durch kräftige, akkurate und verzerrungsarme Wiedergabe aus, wie sie für alle EVE Audio Studiomonitore charakteristisch ist. Alle TS-Serie Subwoofer sind mit symmetrischen XLR Ein- und Ausgängen (Stereo In, Stereo Out, LFE In, LFE/Sub Out) auf der Rückseite und zwei gerasterten Encoder-Potis mit LED-Ring auf der Vorderseite ausgestattet.Mit der serienmäßig zum Subwoofer gehörenden Fernbedienung lässt sich die Lautstärke des Subwoofers und des gesamten Stereo-Systems regeln – ganz bequem vom Hörplatz aus.
Aktiver 10" Subwoofer
Die TS (ThunderStorm) Subwoofer zeichnen sich durch kräftige, akkurate und verzerrungsarme Wiedergabe aus, wie sie für alle EVE Audio Studiomonitore charakteristisch ist. Alle TS-Serie Subwoofer sind mit symmetrischen XLR Ein- und Ausgängen (Stereo In, Stereo Out, LFE In, LFE/Sub Out) auf der Rückseite und zwei gerasterten Encoder-Potis mit LED-Ring auf der Vorderseite ausgestattet.Mit der serienmäßig zum Subwoofer gehörenden Fernbedienung lässt sich die Lautstärke des Subwoofers und des gesamten Stereo-Systems regeln – ganz bequem vom Hörplatz aus.
Aktiver 12" Subwoofer
Die TS (ThunderStorm) Subwoofer zeichnen sich durch kräftige, akkurate und verzerrungsarme Wiedergabe aus, wie sie für alle EVE Audio Studiomonitore charakteristisch ist. Alle TS-Serie Subwoofer sind mit symmetrischen XLR Ein- und Ausgängen (Stereo In, Stereo Out, LFE In, LFE/Sub Out) auf der Rückseite und zwei gerasterten Encoder-Potis mit LED-Ring auf der Vorderseite ausgestattet.Mit der serienmäßig zum Subwoofer gehörenden Fernbedienung lässt sich die Lautstärke des Subwoofers und des gesamten Stereo-Systems regeln – ganz bequem vom Hörplatz aus.
Das voluminöse Gehäuse des Sub6 ist mit einem 11 Zoll Woofer und einem rückseitigen Reflex-Port bestückt. Diese Konfiguration stellt eine lineare Basswiedergabe sicher - unabhängig vom Schalldruckpegel. Das Kontrollfeld ist extrem vielseitig ausgelegt und bietet über L/R-Ein- und Ausgänge sowie den LFE variable Anschlussmöglichkeiten für den Betrieb in 2.1-, 2.2- und Mehrkanalanwendungen. Durch die zahlreichen Einstellmöglichkeiten wie die für Monitore ausgelegte Hochpass-Frequenzweiche sowie die einstellbaren Parameter für die Phasenlage und die Lautstärke ist eine optimale Anbindung an die Monitore Solo6 Be und Twin6 Be sichergestellt. Und schließlich gibt es da noch ein kleines, aber entscheidendes Merkmal: den Fußschalter-Eingang. Über einen hier angeschlossenen Fußschalter lassen sich der Subwoofer und die Hochpass-Frequenzweichen an den Ausgängen, an denen die Monitore angeschlossen sind, deaktivieren. Dadurch wird die Abhörsteuerung in den verschiedenen Phasen der Monitorings vereinfacht und deutlich verbessert.
Eigenschaften
Individuell einstellbare Tiefpass-Weiche + Lautstärke + Phase; Polaritätsschalter; Fußschaltereingang;
Zwei 8" (20cm) Slatefiber-Membranen, hergestellt in Frankreich. Klangneutralität, präzise Basskontrolle
Große Bassreflexöffnungen an der Frontseite
Subwoofer mit langem Hub und hohem Wirkungsgrad. Optimale Reproduktion von klanglichen Details
LFE-Kanal, Stereo Input, Stereo Output
2.1 Lautsprecher-Managementsystem für die optimale Anbindung an Satellitenlautsprecher
200W RMS-Verstärker
Der Aktiv-Basslautsprecher BASIS 11K dient zur Ergänzung der unteren Oktave unserer aktiven Regielautsprecher sowie als Zentralbasseinheit bei Stereo-Wiedergabe. Auf Wunsch kann der Tieftonlautsprecher mit unserem Multichannel-Bassprozessor BCU7.1 auch in Surround-Lautspechersysteme integriert werden. Des Weiteren kann der Subwoofer mit geeigneten AV-Receivern betrieben werden, sodass ein optimales Zusammenspiel auch mit unseren passiven Highendlautsprechern möglich ist.Wir haben für den BASIS 11K ein spezielles Langhub-Basssystem entwickelt, das eine verzerrungsarme Wiedergabe garantiert. Der Subwoofer besitzt eine nierenförmige Abstrahlcharakteristik zur Minimierung rückwärtiger Raumreflexionen. Durch die sogenannte K-Technologie, die wir bereits seit vielen Jahren bei unseren 3- und 4-Wege-Aktivlautsprechern erfolgreich einsetzen, lassen sich durch die Rückwärtsdämpfung größer 10 dB selbst in akustisch kritischen Räumen hervorragende Ergebnisse des raumabhängigen Übertragungsverlaufs erzielen. Resultierend aus diesem Konstruktionsprinzip wird die Platzierung des Basslautsprechers in ihrem Hörraum wesentlich vereinfacht.
Die Verstärkerendstufe arbeitet mit einem 1000 W PWM Leistungsmodul. Ein elektronischer Limiter dient als Schutzvorrichtung und bewahrt den Tieftontreiber vor Überlastungen. Eine rückwärtig angebrachte LED signalisiert das Ansprechen der Schutzvorrichtung sowie den Betriebszustand. Die Entfernung vom Frontlautsprecher zum Basslautsprecher kann 0 bis 1 m betragen. In diesem Bereich ist eine Phasenkorrektur möglich. Durch ein zuschaltbares Hochpassfilter kann die untere Grenzfrequenz auf 40 Hz erhöht werden. Die Trennfrequenz ist zwischen 60 und 80 Hz kontinuierlich einstellbar. Der Übertragungsbereich des LFE-Kanals endet bei 120 Hz. Die gesamte Steuer- und Leistungselektronik sowie alle Steck- und Bedienelemente sind in der Rückseite des Gehäuses integriert.Als Option ist der Basslautsprecher mit einem Abdeckgitter lieferbar. Ein Ausgang am Subwoofer ermöglicht den Betrieb der passiven Variante des BASIS 11K - dem sogenannten BASIS 11KP. Durch diese Erweiterung wird eine Leistungsverdopplung realisiert und die Wahl des Aufstellungsorts unkritischer. Weiterhin kann das System mit einer drahtgebundenen Fernsteuerung in den Bypass-Modus umgeschaltet werden. Alle Ausgangskanäle werden direkt mit den Eingangskanälen verbunden – der Basskanal wird außer Betrieb gesetzt, der LFE-Kanal bleibt aktiv.
Der Aktiv-Basslautsprecher BASIS 13K dient zur Ergänzung der unteren Oktave unserer aktiven Regielautsprecher sowie als Zentralbasseinheit bei Stereo-Wiedergabe. Auf Wunsch kann der Tieftonlautsprecher mit unserem Multichannel-Bassprozessor BCU7.1 auch in Surround-Lautspechersysteme integriert werden. Des Weiteren kann der Subwoofer mit geeigneten AV-Receivern betrieben werden, sodass ein optimales Zusammenspiel auch mit unseren passiven Highendlautsprechern möglich ist.Wir haben für den BASIS 13K ein spezielles Langhub-Basssystem entwickelt, das eine verzerrungsarme Wiedergabe garantiert. Der Subwoofer besitzt eine nierenförmige Abstrahlcharakteristik zur Minimierung rückwärtiger Raumreflexionen. Durch die sogenannte K-Technologie, die wir bereits seit vielen Jahren bei unseren 3- und 4-Wege-Aktivlautsprechern erfolgreich einsetzen, lassen sich durch die Rückwärtsdämpfung größer 10 dB selbst in akustisch kritischen Räumen hervorragende Ergebnisse des raumabhängigen Übertragungsverlaufs erzielen. Resultierend aus diesem Konstruktionsprinzip wird die Platzierung des Basslautsprechers in ihrem Hörraum wesentlich vereinfacht.Die Verstärkerendstufe arbeitet mit einem 1000 W PWM Leistungsmodul. Ein elektronischer Limiter dient als Schutzvorrichtung und bewahrt den Tieftontreiber vor Überlastungen. Eine rückwärtig angebrachte LED signalisiert das Ansprechen der Schutzvorrichtung sowie den Betriebszustand. Die Entfernung vom Frontlautsprecher zum Basslautsprecher kann 0 bis 1 m betragen. In diesem Bereich ist eine Phasenkorrektur möglich. Durch ein zuschaltbares Hochpassfilter kann die untere Grenzfrequenz auf 40 Hz erhöht werden. Die Trennfrequenz ist zwischen 60 und 80 Hz kontinuierlich einstellbar. Der Übertragungsbereich des LFE-Kanals endet bei 120 Hz. Die gesamte Steuer- und Leistungselektronik sowie alle Steck- und Bedienelemente sind in der Rückseite des Gehäuses integriert.
Als Option ist der Basslautsprecher mit einem Abdeckgitter lieferbar. Ein Ausgang am Subwoofer ermöglicht den Betrieb der passiven Variante des BASIS 13K - dem sogenannten BASIS 13KP. Durch diese Erweiterung wird eine Leistungsverdopplung realisiert und die Wahl des Aufstellungsorts unkritischer. Weiterhin kann das System mit einer drahtgebundenen Fernsteuerung in den Bypass-Modus umgeschaltet werden. Alle Ausgangskanäle werden direkt mit den Eingangskanälen verbunden – der Basskanal wird außer Betrieb gesetzt, der LFE-Kanal bleibt aktiv.
Der Aktiv-Basslautsprecher BASIS 14K dient zur Ergänzung der unteren Oktave unserer aktiven Regielautsprecher sowie als Zentralbasseinheit bei Stereo-Wiedergabe. Auf Wunsch kann der Tieftonlautsprecher mit unserem Multichannel-Bassprozessor BCU7.1 auch in Surround-Lautspechersysteme integriert werden. Des Weiteren kann der Subwoofer mit geeigneten AV-Receivern betrieben werden, sodass ein optimales Zusammenspiel auch mit unseren passiven Highendlautsprechern möglich ist.Wir haben für den BASIS 14K ein spezielles Langhub-Basssystem entwickelt, das eine verzerrungsarme Wiedergabe garantiert. Der Subwoofer besitzt eine nierenförmige Abstrahlcharakteristik zur Minimierung rückwärtiger Raumreflexionen. Durch die sogenannte K-Technologie, die wir bereits seit vielen Jahren bei unseren 3- und 4-Wege-Aktivlautsprechern erfolgreich einsetzen, lassen sich durch die Rückwärtsdämpfung größer 10 dB selbst in akustisch kritischen Räumen hervorragende Ergebnisse des raumabhängigen Übertragungsverlaufs erzielen. Resultierend aus diesem Konstruktionsprinzip wird die Platzierung des Basslautsprechers in ihrem Hörraum wesentlich vereinfacht.
Die Verstärkerendstufe arbeitet mit einem 1000 W PWM Leistungsmodul. Ein elektronischer Limiter dient als Schutzvorrichtung und bewahrt den Tieftontreiber vor Überlastungen. Eine rückwärtig angebrachte LED signalisiert das Ansprechen der Schutzvorrichtung sowie den Betriebszustand. Die Entfernung vom Frontlautsprecher zum Basslautsprecher kann 0 bis 1 m betragen. In diesem Bereich ist eine Phasenkorrektur möglich. Durch ein zuschaltbares Hochpassfilter kann die untere Grenzfrequenz auf 40 Hz erhöht werden. Die Trennfrequenz ist zwischen 60 und 80 Hz kontinuierlich einstellbar. Der Übertragungsbereich des LFE-Kanals endet bei 120 Hz. Die gesamte Steuer- und Leistungselektronik sowie alle Steck- und Bedienelemente sind in der Rückseite des Gehäuses integriert.Als Option ist der Basslautsprecher mit einem Abdeckgitter lieferbar. Ein Ausgang am Subwoofer ermöglicht den Betrieb der passiven Variante des BASIS 14K - desm sogenannten BASIS 14KP. Durch diese Erweiterung wird eine Leistungsverdopplung realisiert und die Wahl des Aufstellungsorts unkritischer. Weiterhin kann das System mit einer drahtgebundenen Fernsteuerung in den Bypass-Modus umgeschaltet werden. Alle Ausgangskanäle werden direkt mit den Eingangskanälen verbunden – der Basskanal wird außer Betrieb gesetzt, der LFE-Kanal bleibt aktiv.
Not every production environment has the benefit of space to work in, but every project requires the tight low frequency reproduction and reliability of the Genelec 7040A. Designed in a compact, portable enclosure but shaped with the experience of decades, the stereo 7040A is the ideal subwoofer companion to the 8010 and 8020 monitors. Even in a limited area, the subwoofer provides extension down to 30 Hz, using Genelec's Laminar Spiral Enclosure (LSE™) technology for precise bass articulation and enhanced low end capacity. The result is 100 dB of undistorted SPL using a 6 1/2 inch woofer and a powerful Genelec-designed Class D amplifier.
Ideal for studios where space is at a premium but expectations still run high, the 7040A is a subwoofer of small stature but big potential.
When space is limited but only the best possible results will do, the 7350A Smart subwoofer can be relied upon to deliver the low-end support you need in a remarkably small footprint.
Designed to complement the 8320A and 8330A Smart monitors, the 7350A boasts Laminar Spiral Enclosure (LSE™) technology for a low cut-off and clean articulated bass reproduction, while, inside, an 8 inch woofer is powered by a 150W Class D amplifier. The subwoofer is also fully equipped with Smart Active Monitoring (SAM™) functionality, the most advanced and adaptable monitoring technology available. Genelec Loudspeaker Manager (GLM™) 2.0 software allows for the fine adjustment of up to 30 individual Smart monitors and Smart subwoofers, while AutoCal™ compensates for detrimental room influences to perfectly calibrate your set-up for your listening environment.
Capable of an exceptional performance, the 7350A is the subwoofer of choice for all studios and facilities where space and performance are of equal importance.
Technical specifications
SPL: 104 dB
Frequency response: 22 Hz - 100 Hz (-6 dB) / LFE 22 Hz - 160 Hz (-6 dB)
Driver dimension: 8 inch
Amplifier power: 150 W (Class D)
Dimensions: H 410 x W 350 x D 319 mm, 16 1/8 x 13 3/4 x 12 5/8 inch
Weight: 19 kg / 41.8 lb
Connections: 5.1 inputs / 5 outputs XLR analog, 1 x input / 1 x output XLR digital AES/EBU, 2 x RJ45 control network
Built upon Laminar Spiral Enclosure (LSE™) technology with all of the features of Smart Active Monitoring (SAM™) at its heart, the 7360A Smart subwoofer is the perfect 10 inch partner for any Genelec Smart monitor.
With an integral 300W Class D amplifier and a peak SPL of 109 dB, the 7360A is deceptively powerful in a compact package, yet tempered with the accurate tonal characteristics and high dynamic capabilities of the proven 7000 Series. The subwoofer supports a distributed bass management architecture – a cost-effective package offering support for 7.1 multi-channel set-ups over analogue XLR inputs and outputs together with stereo AES/EBU XLR inputs and outputs without the need for additional external A/D converters. More versatility is available through its SAM features. Genelec Loudspeaker Manager (GLM™) 2.0 software allows for the fine adjustment of up to 30 individual Smart monitors and Smart subwoofers, while AutoCal™ compensates for detrimental room influences to perfectly calibrate your set-up for your listening environment.
The ideal low frequency monitoring tool for small to mid-sized studios, post and broadcast facilities and outside broadcast vehicles, the 7360A Smart subwoofer ensures definition and neutrality you can trust
Created to deliver the ultimate in low-frequency definition, the 12 inch, 400W Class D 7370A is the largest Smart subwoofer in the proven Genelec 7000 Series, representing a blend of engineering expertise and Smart design.
At the core of the 7370A’s remarkable performance is Genelec’s Laminar Spiral Enclosure (LSE™) technology, delivering a low cut-off and pristine bass reproduction. Equally, the integration of Smart Active Monitoring (SAM™) technology delivers ultimate control; Genelec Loudspeaker Manager (GLM™) 2.0 software offers fine adjustments of up to 30 individual Smart monitors and subwoofers, while AutoCal™ compensates for detrimental room influences to perfectly calibrate your set-up for your listening environment. Also supported is a distributed bass management architecture – a cost-effective solution for multi-channel audio, it offers 7.1 channel analogue XLR inputs and outputs together with stereo AES/EBU XLR inputs and outputs without the need for additional external A/D converters.
Created to serve in the most demanding applications, from recording rooms to broadcast suites and outside broadcast vehicles, the 7370A is the low frequency monitoring tool professionals trust.
2.999,00 €*
Diese Website verwendet Cookies, um eine bestmögliche Erfahrung bieten zu können. Mehr Informationen ...