Philosophy FetHead Broadcast is an in-line microphone preamp specially designed for operating in challenging environments. FetHead Broadcast was developed in conjunction with Dutch Broadcasting and facility service company CineVideoGroup. it is Based on technology used in our product FetHead and is fitted with a high quality jfet preamp, followed by a low impedance output buffer to enable output drive to long cables (up to 3kM). FetHead Broadcast offers 23dB's of low noise, high quality amplification which can be applied to either dynamic or condenser microphones as phantom power is transferred to the microphone. In Broadcast or live performance situations, a microphone signal often travels through long cables before reaching the mixing desk. When small microphone signals travel adjacent to power lines or dimmed light cables, audible signal interference is likely to be induced into the microphone cable which often results in a polluted signal. FetHead broadcast amplifies the microphone signal before the cable and greatly improves the signal to noise ratio offering a much higher quality signal to the mixing desk. Because its phantom powered no mains supply or batteries which could stop working during "on air" time / operation are required. Features Low noise Class A JFet amplifier Rugged enclosure 23dB amplification Internal supply power filtering Low impedance output buffer High voltage protection Reverse polarity protection For all types of microphones

The ultimate levitation damper – Set 4 pcs.How it works Place them under your record player, cd/dvd player or under your speakers and isolate your equipment from feedback. Neolev magnetic levitation dampers are our latest development. Placed under CD/DVD players, turntables, speakers etc., they eliminate acoustic feedback and mechanical distortion to bring out the full potential of your equipment. Cancellation of contact induced resonance is very effective as forces perpendicular to the device are never transferred. Based on two repelling Neodium magnets one single NeoLev lifts up to 8kg. NeoLev's are adjustable to ensure perfect levelling. Sonic improvements from NeoLev damping feet Higher resolutionIncreased soundstageGreater dynamic rangeImproved transient responseMore clearly defined bass Applications TurntablesSpeakersCD/dvd playersPreampsPower amps

For powering condenser microphones, the IEC 61938 Phantom Power supply has been the standard for years. Although being proven technology, there are several disadvantages to the current implementation. The microphone signal, for instance is not completely available to he microphone preamp. To the microphone's circuit, the 6K8 resistor presents a load, this causes distortion and reduces the available signal. Also, with the IEC 61938 Phantom Power implementation, isolation from the rest of the preamp or mixer circuit is not complete, this can negatively affect noise performance. True Phantom uses patented technology which overcomes these problems. True Phantom's electronics enable the microphone to operate at no-load condition, which lowers distortion, compared to the current implementation it achieves lower distortion and an increase of the signal-to-noise ratio.   Features Dual channel for stereo recording XLR in and Outputs Power on indicator Ground lift switch Built-in High end Phantom blocking circuit Direct switch, bypasses the Phantom Blocking circuit